Chevrolet Cruze Repair Manual: Body Lock Pillar Outer Panel Sectioning (MIG-Brazing)

Installation Procedure

Cut the body lock pillar outer panel in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the met ...

Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and She ...

Other materials:

If the Vehicle Is Stuck
Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. If stuck too severely for the traction system to free the vehicle, turn the traction system off and use the rocking method. WARNING If the vehicle's tires spin at high speed, they can explode, ...

Steering Linkage Outer Tie Rod Replacement
Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Steering Linkage Tie Rod Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 35 N·m (26 lb ft) Steering Linkage Inner Tie Rod Nut Tighten 60 N·m (44 ...

Heating and Air Conditioning System Description and Operation
Engine Coolant Engine coolant is the key element of the heating system. The thermostat controls engine operating coolant temperature. The thermostat also creates a restriction for the cooling system that promotes a positive coolant flow and helps prevent cavitation. Coolant enters the heater ...