Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Bumpers and Fascias

Specifications

Front Bumper Energy Absorber Replacement

Front Bumper Energy Absorber Replacement

Preliminary Procedure

Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.

  1. Front Bumper Energy Absorber

Procedure

Unclip from front bumper fascia.

Rear Side Door Weatherstrip Replacement - Body Side
Rear Side Door Weatherstrip - Body Side Procedure Start at the front upper corner of the door opening and pull the weatherstrip away from   the door opening flange. Position th ...

Front Bumper Energy Absorber Bracket Replacement
Preliminary Procedure Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement Drivetrain and Front Suspension Frame Bolt Front Caution: ...

Other materials:

Floor Mats
WARNING If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the p ...

Front Bumper Energy Absorber Bracket Replacement
Preliminary Procedure Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement Drivetrain and Front Suspension Frame Bolt Front Caution: Refer to Fastener Caution in the Preface section. Tighten 160 N·m (119 lb ft) Note: Do NOT reu ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to ...

© 2011-2024 Copyright www.ccruze.com