Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Checking and Adding Power Steering Fluid

Chevrolet Cruze Repair Manual / Steering / Power Steering / Checking and Adding Power Steering Fluid

Caution: When adding fluid or making a complete fluid change, always use the proper power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.

  1. Clean the area  surrounding the reservoir cap.
  2. Remove the reservoir cap.
  3. Inspect the power steering pump fluid level at regular intervals. Use the appropriate procedure below.

Add fluid when required. Refer to Fluid and Lubricant Recommendations.

Fluid Is Hot

3.1. Run the engine until the fluid reaches about 80°C (170°F).

3.2. Turn the engine OFF.

3.3. Remove the reservoir cap.

3.4. Inspect the fluid level on the capstick.

3.5. Ensure that the fluid level is at the HOT/FULL/MAX mark on the capstick.

  1. If the fluid level is low, add power steering fluid to the proper level.
  2. Install the reservoir cap.
  3. When checking the fluid level after servicing the steering system, bleed the air from the system. Refer to Power Steering System Bleeding.
Power Steering
Specifications Power Steering System Bleeding Note: Use clean, new power steering fluid type only. See the Maintenance and Lubrication subsection for fluid specifications. Hoses tou ...

Power Steering Fluid Reservoir Replacement
Preliminary Procedure Remove as much power steering fluid from the remote power steering fluid reservoir as possible. Place drain pans under the vehicle as needed. Hose Clamp Pro ...

Other materials:

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Disable the SIR System. Refer to SIR Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove all related panels and compo ...

How comfortable is the Mercedes-Benz C Class
The interior of the C-Class Coupe matches the allure of its striking exterior design. Across all versions, you'll find premium materials that exude quality, complemented by metallic and piano black or wood accents. The sleek and minimalist layout adds to the sophistication, with standard sports s ...

Aluminum Wheel Porosity Repair
Remove the tire and wheel. Refer to Tire and Wheel Removal   and Installation. Inflate the tire to the manufactures specified pressure as stated on the tire. Submerge the tire/wheel into a water bath in order to locate the leak. Inscribe a mark on the wheel in order to indic ...

© 2011-2024 Copyright www.ccruze.com