Chevrolet Cruze Repair Manual: Drive Belt Replacement
Special Tools
EN 6349 Locking Pin
For equivalent regional tools, refer to Special Tools.
Removal Procedure
- Open the hood.
- Remove the power steering pump belt. Refer to Power Steering Pump Belt Replacement.
- Raise the vehicle by its full height. Refer to Lifting and Jacking the Vehicle.
- Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement.
- Release tension to the drive belt tensioner counterclockwise (1) and lock with EN 6349 pin (2).
- Remove the drive belt (1).
Installation Procedure
- Install the drive belt (1).
- Release tension to the tensioner at projection (1) counterclockwise.
Note: Allow tensioner to slide back slowly.
- Remove EN 6349 pin (2).
- Apply tension to the tensioner at projection (1) clockwise.
- Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement.
- Lower the vehicle by its full height.
- Install the power steering pump belt. Refer to Power Steering Pump Belt Replacement.
- Close the hood.
Brake Drum Replacement
Special Tools
CH 41013 Rotor Resurfacing Kit
CH 42450-A Wheel Hub Resurfacing Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Warning: Refer to Brake Dust Warni ...
Generator Air Conditioning Compressor,Power Steering Pump Belt Replacement
Removal Procedure
Raise the vehicle full height. Refer to Lifting and Jacking the Vehicle.
Remove the front compartment splash shield. Refer to Front Compartment
Splash Shield Replacement.
...
Other materials:
Front Suspension Description and Operation
The front suspension has 2 primary purposes:
Isolate the driver from irregularities in the road surface.
Define the ride and handling characteristics of the vehicle.
The front suspension absorbs the impact of the tires travelling over
irregular road surfaces and dissipates this energy thr ...
Water Hose Test
Note: Use a water hose without the nozzle attached.
Have an assistant inside of the vehicle i 1. n order to locate the leak.
Begin testing at the base of the window or the windshield.
Slowly move the hose upward and across the top of the vehicle.
...
Automatic Transmission Shift Lock Control Function Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the
vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
It should be parked on a level surface.
2. Firmly apply the parking brake.
Be rea ...
