Caution: Refer to Clearcoat/Ultraviolet Screeners Caution in the Preface section.
Note: Always refer to the manufacturer's packaged instructions for the detailed procedures of materials used for compounding and/or polishing.
Since the severity of the condition varies from area to area, proper diagnosis of the contamination extent is critical to the success of the repairs. Perform the diagnosis under high intensity fluorescent lighting on the horizontal surfaces (hood, roof panel, rear compartment lid), after the surfaces have been properly cleaned by washing the vehicle with a GM approved Liquid Wash and Wax kit.
There are 3 basic types of acid rain damage: Surface Level Contamination: May be repaired by simply washing the vehicle, cleaning the surface with a silicone wax and grease remover, neutralizing acidic residue, and finesse polishing--Refer to Surface Level Contamination Repair.
Clearcoat Etching: Slight etching is still noticeable after the above washing and finesse polishing procedure. Refer to Slight Clearcoat Damage - Wet Sanding, Finesse Polishing.
Basecoat Etching: Severe etching beyond the clearcoat into the basecoat in the affected areas will require refinishing. Refer to Basecoat/Clearcoat Paint Systems.
Surface Level Contamination Repair
Slight Clearcoat Damage - Wet Sanding, Finesse Polishing
Rear Compartment Lid Emblem/Nameplate Replacement (Cruze - Left Side)
Rear Compartment Lid Emblem Assembly
Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface
section.
Procedure
The part and surface should be 21°C (70°F) prior to installation. The
vehicle should remain 21°C (70°F) for
one hour after assembly to allow adhesive to deve ...
Installation Procedure
Cut the front hinge pillar body in corresponding locations to fit the
remaining original panel. The sectioning joint should be trimmed
to allow a gap of one-and-one-half-times the metal thickness at the
sectioning joint.
Create a 50 mm (2 in) backing plate from the unused portion of ...
Front Seat Belt System
The front seat belt system includes a driver and passenger seat belt
pretensioner retractor. Both front seat belt pretensioners includes a
seat belt switch in the seat buckle which controls a reminder lamp and a tone
alarm.
Note: The front passenger seat is equipped with a passenger
presence ...