Preliminary Procedure
Remove the front bumper fascia opening cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement
Caution: Refer to Fastener Caution in the Preface section.
Tighten 160 N·m (119 lb ft) Note: Do NOT reuse the old bolt.
Tip
For removal only loosen the bolt.
Tighten
22 N·m (17 lb ft)
Note: Secure the drivetrain and front suspension frame with hydraulic jack.
Front Bumper Impact Bar Replacement
The front bumper impact bar is welded on, and must be replaced at the factory welds to retain structure integrity. Refer to Front Bumper Impact Bar Replacement.
Tire Sidewall Labeling
Useful information about a tire is molded into its sidewall. The examples show
a typical passenger vehicle tire and a compact spare tire sidewall.
Passenger (P-Metric) Tire Example
(1) Tire Size: The tire size is a combination of letters and numbers used
to define a particular tire's wid ...
Engine Coolant
The cooling system in the vehicle is filled with DEX-COOL engine coolant. This
coolant is designed to remain in the vehicle for 5 years or 240 000 km (150,000
mi), whichever occurs first.
The following explains the cooling system and how to check and add coolant when
it is low. If there is a ...
Stabilizer Shaft Replacement
Special Tools
CH 904 Underframe
CH 49289 Centering Adapter
EN 45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Turn the front wheels to the straight forward position and secure the
steering wheel from moving.
...