Chevrolet Cruze Repair Manual: Front Fender Front Lower Bracket Replacement
Preliminary Procedure
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
- Remove the headlamp. Refer to Headlamp Replacement
- Remove the front fender. Refer to Front Fender Replacement.
- Front Fender Bracket Bolt
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m(80 lb in)
- Front Fender Front Lower Bracket
Front End Upper Tie Bar Replacement
Preliminary Procedure
Remove the front bumper fascia. Refer to Front Bumper Fascia
Replacement
Remove the radiator support bracket. Refer to Radiator Support Bracket
Replacement
...
Hood Primary Latch Release Cable Replacement
Preliminary Procedure
Remove hood primary latch release cable handle. Refer to Hood Primary
Latch Release Cable Handle Replacement.
Remove the front bumper fascia. Refer to Front Bu ...
Other materials:
Rear Compartment Lid Adjustment
Rear Compartment Lid
Caution: Refer to Fastener Caution in the Preface section.
Procedure
Loosen the rear compartment lid hinge bolt (Qty: 4) to
adjust the rear compartment lid.
Adjust the rear compartment lid in order to obtain an even gap between
the rear compartment ...
Installation Procedure
Cut the rocker outer panel in corresponding locations to fit the
remaining original panel. The sectioning joint should be trimmed to
allow a gap of one-and-one-half-times the metal thickness at the sectioning
joint.
Create 50 mm (2 in) backing plates from the unused portion of the
...
Instrument Panel Lower Trim Pad Cover Replacement
Preliminary Procedure
Remove the left outer trim cover. Refer to Instrument Panel Outer Trim Cover
Replacement - Left Side.
Instrument Panel Lower Trim Pad Cover Screw (Qty: 3)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
2.5 N·m (23 lb in)
Instrument Panel ...
