Chevrolet Cruze Repair Manual: Front Floor Panel Carpet Replacement
Preliminary Procedures
- Remove front seats. Refer to Driver or Passenger Seat Replacement.
- Remove rear seat. Refer to Rear Seat Replacement.
- Remove the front floor console. Refer to Front Floor Console Replacement.
- Remove front sill panels. Refer to Front Side Door Sill Trim Plate Replacement.
- Remove rear sill panels. Refer to Rear Side Door Sill Trim Plate Replacement.
- Remove center pillar lower garnish moldings. Refer to Center Pillar Lower Garnish Molding Replacement.
Front Floor Panel Carpet Assembly
Procedure
Loosen Transmission Control.
Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for
drying or for replacing the components:
For a 1-piece carpet assembly bonded to a cotton or a fiber padding,
repla ...
Headlining Trim Panel Replacement (With Sunroof)
Warning: Do not attempt to repair or alter the head impact
energy-absorbing material glued to the headliner or to the garnish
trims. If the material is damaged, replace the headliner and/or the ...
Other materials:
AM-FM Radio
Control Buttons
The buttons used to control the radio are: BAND: Press to turn the radio
on and choose between AM, FM, and SiriusXM®, if equipped.
MENU/SEL: Turn to navigate the available menus and to search for stations.
INFO: Press to display additional information that may be available for
...
Hood Adjustment
Hood
Caution: Refer to Fastener Caution in the Preface section.
Procedure
Loosen the hood hinge reinforcement nuts (Qty: 4).
Adjust the hood in order to obtain an even gap on both sides between the
hood and the fenders, the headlamps and
the front bumper fascia and so that the hood ...
Exterior Lamp Controls
The exterior lamp control is to the left of the steering column on the instrument
panel.
There are four positions:
(Off): Briefly turn to this position
to turn the automatic lamp control off or on again.
AUTO (Automatic): Turns the headlamps on automatically at normal brightness,
togethe ...
