Chevrolet Cruze Repair Manual: Front Side Door Window Weatherstrip Replacement
Preliminary Procedure
- Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement.
- Remove the front side door window frame rear cover. Refer to Front Side Door Window Frame Rear Cover Replacement.
Front Side Door Window Weatherstrip
Procedure
Pull the front side door window weatherstrip away from the outer window flange to remove.
Rear Side Door Window Weatherstrip Replacement
Preliminary Procedure
- Remove the rear side door stationary window. Refer to Rear Side Door Stationary Window Replacement
- Remove the rear side door window frame front cover. Refer to Rear Side Door Window Frame Front Cover Replacement.
Rear Side Door Window Weatherstrip
Procedure
Pull the rear side door window weatherstrip away from the outer window flange to remove.
Adhesive Service Kit Description
Use the urethane adhesive for replacement of any urethane adhesive-installed windows.
Use these materials based on specific manufacturer.
Do NOT intermix primers or adhesives from one manufacturer to another.
Always follow the system manufacturer's instructions for application, handling, and curing.
Rear Side Door Window Outer Sealing Strip Replacement
Rear Side Door Window Outer Sealing Strip Assembly
...
Power Windows Description and Operation
Power Windows System Components
The power window system consists of the following components:
Driver window switch
Passenger window switch
Left rear window switch
Right rear window switch
...
Other materials:
Heated Front Seats
WARNING
If you cannot feel temperature change or pain to the skin, the seat heater
may cause burns. To reduce the risk of burns, people with such a condition should
use care when using the seat heater, especially for long periods of time. Do not
place anything on the seat that insulates again ...
Installation Procedure
Remove all mounds or loose pieces of urethane adhesive from the
pinch-weld area.
Inspect for any of the following problems in order to help prevent
future breakage of the window:
High weld
Solder spots
Hardened sealer
Any other obstruction or irregularity in the pinch-weld fla ...
Installation Procedure
Note: If the location of the original plug weld holes can
not be determined, space the plug weld holes every 40 mm (1½ in).
Drill 8 mm (5/16 in) for plug welding along the edges of the underbody
rear side rail reinforcement as noted from
the original panel.
Clean and ...
