Chevrolet Cruze Repair Manual: Front Wheel Bearing and Hub Replacement

Installation Procedure

Install NEW stabilizer shaft insulators (1) to stabilizer shaft (2) so that the slit in the insulator is facing the rear of the vehicle. Install the insulator c 2. lamp to the insu ...

Removal Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the brake rotor. Refer to Front Brake Rotor Replacement. Remove the wheel speed sensor screw (2). Remov ...

Other materials:

Rear Compartment Lid Adjustment
Rear Compartment Lid Caution: Refer to Fastener Caution in the Preface section. Procedure Loosen the rear compartment lid hinge bolt (Qty: 4) to   adjust the rear compartment lid. Adjust the rear compartment lid in order to obtain an even gap between the rear compartment ...

Windshield Garnish Molding Replacement
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling. Windshield Garnish Molding Assembly Procedure Loosen  tether clip and steel clips. Disconnect electrical connector. The tether clip at the upper portion of the garnish molding MUST be repla ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR   Disabling and Enabling. Disconnect the negative battery cable. Refer to ...