Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Front Wheelhouse Panel Rear Reinforcement Replacement (MIG-Brazing)

Chevrolet Cruze Repair Manual / Body repair / Collision Repair / Front Wheelhouse Panel Rear Reinforcement Replacement (MIG-Brazing)

Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the front wheelhouse panel rear reinforcement as noted from the original panel. Drill 8 mm (5/16 in) for plug welding whe ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR Syst ...

Other materials:

Generator Air Conditioning Compressor,Power Steering Pump Belt Replacement
Removal Procedure Raise the vehicle full height. Refer to Lifting and Jacking the Vehicle. Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement. Rotate the drive belt tensioner bolt (2) clockwise. Remove the drive belt (1) while pullin ...

Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS). The low tire pressure warning light alerts to a significant loss in pressure of one of the vehicle's tires. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the T ...

Heated Seats
If available, the controls are on the center stack. The engine must be running to operate the heated seats. Press or to heat the driver or passenger seat cushion and seatback. Press the control once for the highest setting. With each press of the control, the heated seat will change to ...

© 2011-2024 Copyright www.ccruze.com