Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Instrument Panel Assembly Replacement

Preliminary Procedures

Preliminary Procedures

  1. Disable the SIR system. Refer   to SIR Disabling and Enabling
  2. Remove the front floor console assembly. Refer to Front Floor Console Replacement.
  3. Remove the radio assembly. Refer to Radio Replacement.
  4. Remove the driver information display bezel. Refer to Driver Information Display Bezel Replacement.
  5. Remove the heater and air conditioning control. Refer to Heater and Air Conditioning Control Replacement.
  6. Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement
  7. Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement.
  8. Remove both instrument panel outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side.
  9. Remove the instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement.
  10. Remove the instrument panel molding. Refer to Instrument Panel Molding Replacement.
  11. Remove the center air outlet assembly. Refer to Instrument Panel Center Air Outlet Replacement.
  12. Remove the left outer air outlet assembly. Refer to Instrument Panel Outer Air Outlet Replacement - Left Side.
  13. Remove the right outer air outlet assembly. Refer to Instrument Panel Outer Air Outlet Replacement - Right Side.
  1. Instrument Panel Assembly Screw (Qty: 9)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 9 N·m(80 lb in)

  1. Instrument Panel Assembly

Procedure

  1. Note location and routing of the instrument panel wiring harness prior to removal of the instrument panel assembly to ensure proper reinstallation.
  2. Disconnect the wiring harness from the instrument panel assembly.
  3. With the aid of an assistant, remove the instrument panel assembly from the vehicle.
  4. When replacing the instrument panel assembly, transfer all necessary components.
Instrument Panel Upper Trim Pad Insert Replacement
Preliminary Procedure Remove the instrument panel. Refer to Instrument Panel Assembly Replacement. Instrument Panel Upper Trim Pad Insert Screw (Qty: 6) Caution: Refer to Fastener Caution ...

Instrument Panel Tie Bar Replacement (Right Hand Drive)
Removal Procedure Remove instrument panel compartment. Refer to Instrument  Panel Compartment Replacement. Remove instrument panel wiring harness (2) from instrument panel tie ba ...

Other materials:

Inflatable Restraint Passenger Presence Detection System - If Equipped
Note: The passenger presence detection system includes an ECU and a sensor mat that can be serviced separately. After repairing or replacing any part of the passenger presence detection system, the system must be rezeroed in order to function properly. The passenger presence detection system i ...

Fuel Additives
To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to work properly. In most cases, nothing should have to be added to the fuel. However, some gas ...

Vehicle Load Limits
It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on the vehicle show how much weight it may properly carry: the Tire and Loadi ...

© 2011-2024 Copyright www.ccruze.com