Chevrolet Cruze Repair Manual: Instrument Panel Outer Air Outlet Replacement - Left Side
Preliminary Procedure
- Remove instrument panel lower trim pad cover - left side. Refer to Instrument Panel Lower Trim Pad Cover Replacement.
- Remove instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement.
- Remove instrument panel cluster lower trim plate. Refer to Instrument Panel Cluster Lower Trim Plate Replacement.
- Remove instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement - Left Side.
- Instrument Panel Outer Air Outlet Assembly
Procedure
- Remove instrument panel outer air oulet duct left side.
- Remove clip (Qty: 4).
Instrument Panel Center Air Outlet Replacement
Preliminary Procedure
Remove instrument panel center upper molding (2). Refer to Instrument Panel Center Upper Molding Replacement.
- Instrument Panel Center Air Outlet
Instrument Panel Outer Air Outlet Replacement - Right Side
Preliminary Procedure
Remove instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement - Right Side.
Instrument Panel Outer Air Outlet Assembly
Procedure
- Remove instrument panel outer air oulet duct right side.
- Remove clip (Qty: 4).
Radio Cooling Duct Replacement (Right Hand Drive)
Preliminary Procedure
- Remove IP Compartment. Refer to Instrument Panel Compartment Replacement.
- Remove floor air outlet duct - left side. Refer to Floor Air Outlet Duct Replacement - Left Side.
Radio Cooling Duct
Procedure
Remove radio cooling duct.
Air Conditioning Condenser Replacement (1.6L LDE, LXT, LXV, and 1.8L 2H0)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Rem ...
Floor Air Outlet Replacement
Removal Procedure
Remove the instrument panel assembly. Refer to Instrument Panel
Assembly Replacement.
Remove the instrument panel wiring harness (2) from the instrument panel ...
Other materials:
Waterleak Test Preparation
GM vehicles are designed to operate under normal environmental
conditions.
The design criteria for sealing materials and components takes into
consideration the sealing forces required to withstand the natural
elements. These specifications cannot take into consideration any artificial ...
Installation Procedure
Prepare all mating surfaces as necessary.
Align the body lock pillar outer panel reinforcement.
Create 8 x 24 mm (5/16 x 15/16 in) slots for MIG-brazing upper (1) and
lower (2).
Clean and prepare the attaching surfaces for spot welding and brazing.
Position the body loc ...
Air Conditioning Condenser Replacement (1.6L LDE, LXT, LXV, and 1.8L 2H0)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove front bumper fascia. Refer to Front Bumper Fascia Replacement.
Remove air intake duct ...
