Chevrolet Cruze Repair Manual: Instrument Panel Wiring Harness Replacement
Removal Procedure
- Remove instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement.
- Remove instrument panel wiring harness (2) from instrument panel tie bar
(1).
Disconnect electrical connectors.
Installation Procedure
- Install instrument panel wiring harness (2) from instrument panel tie
bar (1).
Connect electrical connectors.
- Install instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement.
Instrument Panel Tie Bar Replacement (Right Hand Drive)
Removal Procedure
Remove instrument panel compartment. Refer to Instrument Panel
Compartment Replacement.
Remove instrument panel wiring harness (2) from instrument panel tie ba ...
Front Floor Console Storage Tray Replacement
Preliminary Procedure
Remove the automatic or manual transmission control lever trim cover. Refer
to Automatic or Manual Transmission Control Lever
Trim Cover Replacement
Front Floor Conso ...
Other materials:
Steering Wheel Controls
For vehicles with audio steering wheel controls, some audio controls can be adjusted
at the steering wheel.
: For vehicles with a Bluetooth,
OnStar, or navigation system, press to interact with those systems.
: Press to silence the vehicle speakers
only. Press again to turn the sound on. ...
Scrapping Procedure
During the course of a vehicle's useful life, certain situations may arise
which will necessitate the disposal of a live (undeployed)
pretensioner. The following information covers the proper procedures for the
disposing of a live (undeployed) pretensioner. Deploy the
pretensioner before dispo ...
Entry Lighting
The headlamps, parking lamps, taillamps, back-up lamps, and most of the interior
lamps turn on briefly when is pressed
on the Remote Keyless Entry (RKE) transmitter.
After about 30 seconds the exterior lamps turn off, and then the dome and remaining
interior lights will dim to off. Entry lig ...
