Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Mirror Adjustment

Exterior

Controls for the outside power mirrors are on the driver door.

Controls for the outside power mirrors are on the driver door.

1. Turn the selector switch to L (Left) or R (Right) to choose the driver or passenger mirror.

2. Move the control to adjust the mirror.

3. Turn the selector switch to the O position to deselect the mirror.

Vehicles with a manual mirror adjustment have controls next to each mirror.

Vehicles with a manual mirror adjustment have controls next to each mirror.

Interior Mirror

Adjustment

Adjust the rearview mirror to view the area behind the vehicle.

Manual Rearview Mirror

If equipped with a manual rearview mirror, push the tab forward for daytime use and pull it for nighttime use to avoid glare from the headlamps from behind

Automatic Dimming Rearview Mirror

If equipped with an automatic dimming rearview mirror, the mirror will automatically reduce the glare of headlamps from behind. The dimming feature and indicator light come on each time the vehicle is started.

Passenger Sensing System
United States Canada The passenger sensing system turns off the front outboard passenger frontal airbag and knee airbag under certain conditions. No other airbag is affected by the passenger ...

Steering Wheel Adjustment
To adjust the steering wheel: 1. Pull the lever down. 2. Move the steering wheel up or down. 3. Pull or push the steering wheel closer or away from you. 4. Push the lever up to lock the steering ...

Other materials:

Work Stall Test Warning
Warning: One or more of the following guidelines may apply when performing specific required tests in the work stall: When a test requires spinning the drive wheels with the vehicle jacked up, adhere to the following precautions: Do not exceed 56 km/h (35 mph) when spinning one drive wheel ...

Power Door Locks Description and Operation
Door Lock System Components The power door lock system consists of the following components: Door lock switch - located in the center of the instrument panel Body control module (BCM) Driver door latch Passenger door latch Left rear door latch Right rear door latch Door Lock System ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the front wheelhouse panel rear reinforcement as noted from the original panel. Drill 8 mm (5/16 in) for plug welding where front wheelhouse front panel and front wheelhouse panel rear   reinforcement overlap ...

© 2011-2024 Copyright www.ccruze.com