Chevrolet Cruze Owners Manual: Operation

Chevrolet Cruze Owners Manual / Infotainment System / Introduction / Operation

Controls

The infotainment system is operated by using the pushbuttons, multifunction knobs, menus shown on the display, and steering wheel controls, if equipped.

Turning the System On or Off

(Volume/Power): Press to turn the system on and off.

Automatic Switch-Off

If the infotainment system has been turned on after the ignition is turned off, the system will turn off automatically after 10 minutes.

Volume Control

volume. (Volume/Power): Turn to adjust the volume.

(Phone/Mute): Press Press again, or turn the to mute the infotainment system.

Press again, or turn the Menu System knob to cancel mute.

Menu System

The menu system appears on the display screen.

Controls

The MENU/SEL knob and the BACK button are used to navigate the menu system.

MENU/SEL Knob:

Press to: • Enter the menu system.

• Select or activate the highlighted menu option.

• Confirm a set value.

• Turn a system setting on or off.

Turn to:
• Highlight a menu option.

• Select a value.

BACK:

Press to: • Exit a menu.

• Return from a submenu screen to the previous menu screen.

• Delete the last character in a sequence.

Selecting a Menu Option

1. Turn the MENU/SEL knob to move the highlighted bar.

2. Press the MENU/SEL knob to select the highlighted option.

Submenus

An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.

Activating a Setting

1. Turn the MENU/SEL knob to highlight the setting.

2. Press the MENU/SEL knob to activate the setting.

Setting a Value

1. Turn the MENU/SEL knob to change the current value of the setting.

2. Press the MENU/SEL knob to confirm the setting.

Turning a Function On or Off

1. Turn the MENU/SEL knob to highlight the function.

2. Press the MENU/SEL knob to turn the function on or off.

Entering a Character Sequence

1. Turn the MENU/SEL knob to highlight the character.

2. Press the MENU/SEL knob to select the character.

Press the BACK button to delete the last character in the sequence or press and hold to delete the entire character sequence.

Audio Settings

The audio settings can be set for each radio band and each audio player source.

To quickly reset an audio setting value to 0: 1. Press the TONE button.

2. Select the audio setting.

3. Press and hold the MENU/SEL button until the value changes to 0.

Press the BACK button to go back to the Tone Settings menu.

Adjusting the Treble, Midrange, and Bass

1. Press the TONE button.

2. Select Treble, Midrange, or Bass.

3. Select the value.

Press the BACK button to go back to the Tone Settings menu.

Adjusting the Fader and Balance

1. Press the TONE button.

2. Select Fader or Balance.

3. Select the value.

Press the BACK button to go back to the Tone Settings menu.

Adjusting the EQ (Equalizer)

For vehicles that have an equalizer: 1. Press the TONE button.

2. Select EQ presets.

3. Select the setting.

Press the BACK button to go back to the Tone Settings menu.

System Settings

Configuring the Number of Favorite Pages

To configure the number of available favorite pages: 1. Press the CONFIG button.

2. Select Radio Settings.

3. Select Radio Favorites.

4. Select the number of available favorite pages.

5. Press the BACK button to go back to the System Configuration menu.

Auto Volume

The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent.

The level of volume compensation can be selected, or the auto volume feature can be turned off.

1. Press the CONFIG button.

2. Select Radio Settings.

3. Select Auto Volume.

4. Select the setting.

5. Press the BACK button to go back to the System Configuration menu.

Maximum Startup Volume

The maximum volume played when the radio is first turned on can be set.

1. Press the CONFIG button.

2. Select Radio Settings.

3. Select Maximum Startup Volume.

4. Select the setting.

5. Press the BACK button to go back to the System Configuration menu.

Overview

1. • Turns the system on or off and adjusts the volume. 2. Buttons 1 to 6 • Radio: Saves and selects favorite stations. 3. • Radio: Seeks the previous station. • CD: Selects the previo ...

Other materials:

Replacing LATCH System Parts After a Crash
WARNING A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have the system inspec ...

SIR System Description and Operation
SIR System Overview The supplemental inflatable restraint (SIR) system supplements the protection offered by the occupants Seat Belt System (2). The SIR system may contain several inflator modules located throughout the vehicle, i.e. steering wheel module (1), instrument panel module (1), ...

Rear Wheel Bearing and Hub Replacement (Drum Brake)
Special Tools EN 45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and ...