Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Passenger Seat Frame Replacement

Removal Procedure

  1. Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion  Cover and Pad Replacement

  1. Remove the wire harness (1), if equipped.

  1. Remove front seat back cushion cover (1) and pad (2) from frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Remove   inner seat frame cover (1).
  2. Remove the wire harness, if equipped.

Installation Procedure

  1. Install the wire harness, if equipped.
  2. Install inner seat frame cover (1).

  1. Install front seat back cushion cover (1) and pad (2) to frame (3). Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement

  1. Install the wire harness (1), if equipped.

  1. Install front seat cushion cover (1) and pad (2) to frame (3). Refer to Front Seat Cushion Cover and Pad Replacement

Rear Seat Replacement (40 Percent Seat)

Preliminary Procedure

Preliminary Procedure

Rear seat cushion. Refer to Rear Seat Cushion Replacement

  1. Rear Seat Back - Left Side

Procedure

  1. Fold  down rear seat backrest.
  2. Remove rear seat backrest from booth side guide.

Rear Seat Replacement (60 Percent Seat)

Preliminary Procedure

Preliminary Procedure

Remove rear seat belt buckle. Refer to Rear Seat Belt Buckle Replacement

Rear Seat Back - Right Side

Procedure

  1. Fold   down rear seat backrest.
  2. Remove rear seat backrest from booth side guide.

Rear Seat Armrest Replacement

Preliminary Procedure

Preliminary Procedure

Remove rear seat back - right side. Refer to Rear Seat Replacement

  1. Armrest Hinge Cover
  2. Armrest Hinge Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten 4.5 Nm (40 lb in)

  1. Armrest Hinge Bolt

Tighten 9 Nm (80 lb in)

  1. Armrest

Rear Seat Head Restraint Replacement

  1. Rear Seat Head Restraint

Procedure

Push the head restraint guide button and remove the head restraint.

Rear Seat Head Restraint Guide Replacement

Preliminary Procedure

Preliminary Procedure

Remove rear seat head restraint. Refer to Rear Seat Head Restraint Replacement.

  1. Rear Seat Head Restraint Guide Replacement

Procedure

Unclip the rear seat head restraint guide with a suitable device (Qty: 2)

Rear Seat Cushion Cover and Pad Replacement

Preliminary Procedure

Preliminary Procedure

Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement

Rear Seat Cushion Cover

Procedure

  1. Remove the hog rings that secure the rear seat cushion cover to the pad.
  2. Remove seat cushion cover from Velcro.

Rear Seat Cushion Pad

Rear Seat Cushion Replacement

Rear Seat Cushion

Rear Seat Cushion

Procedure

Pull up on the front of the seat cushion to disengage the retainers, and lift out of the vehicle.

Seat Cushion Retainer (Qty: 2)

Rear Seat Back Latch Replacement (40 Percent Seat)

Preliminary Procedure

Preliminary Procedure

  1. Remove rear seat - left side.  Refer to Rear Seat Replacement.
  2. Remove rear seat back cushion cover and pad - left side. Refer to Rear Seat Back Cushion Cover and Pad Replacement - Left Side

Rear Seat Back Latch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 Nm (33 lb ft)

Rear Seat Back Latch

Rear Seat Back Latch Replacement (60 Percent Seat)

Preliminary Procedure

Preliminary Procedure

  1. Remove rear seat - right side. Refer to Rear Seat Replacement.
  2. Remove rear seat armrest. Refer to Rear Seat Armrest Replacement
  3. Remove rear seat back cushion cover and pad - right side. Refer to Rear Seat Back Cushion Cover and Pad Replacement - Right Side

Rear Seat Back Latch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten 45 Nm (33 lb ft)

Rear Seat Back Latch

Driver Seat Frame Replacement
Removal Procedure Remove front seat cushion cover (1) and pad (2) from frame (3). Refer to Front Seat Cushion Cover and Pad Replacement Remove the wire harness (1), if equipped. ...

Rear Seat Back Cushion Cover and Pad Replacement - Left Side
Preliminary Procedure Remove rear seat - left side. Refer to Rear Seat Replacement Rear Seat Back Cushion Cover Procedure Remove the staples  from the seat back cover. Remove seat ba ...

Other materials:

Installation Procedure
Apply structural adhesive on the flanges of the rear side door inner panel where the rear side door outer panel bears on. Align the rear side door outer panel. Verify the fit of the rear side door outer panel. Clamp the rear side door outer  panel into position. Pre-fla ...

Power Steering
Specifications Power Steering System Bleeding Note: Use clean, new power steering fluid type only. See the Maintenance and Lubrication subsection for fluid specifications. Hoses touching the frame, body or engine may cause system noise. Verify that the hoses do not touch any ot ...

Reduced Engine Power Light
The reduced engine power light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. This light, along with the malfunction indicator lamp, displays when a noticeable reduction in the vehicle's performance occurs. Stop the vehic ...

2011-2022 Copyright www.ccruze.com