Chevrolet Cruze Owners Manual: Passenger Sensing System
United States
Canada
The passenger sensing system turns off the front outboard passenger frontal airbag and knee airbag under certain conditions. No other airbag is affected by the passenger sensing system.
The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started.
Safety Belts
Refer to the following sections for important information on how to use safety
belts properly:
• Safety Belts
• How to Wear Safety Belts Properly
• Lap-Shoulder Belt
• Lower Anchors and Teth ...
Mirror Adjustment
Exterior
Controls for the outside power mirrors are on the driver door.
1. Turn the selector switch to L (Left) or R (Right) to choose the driver or
passenger mirror.
2. Move the control to adj ...
Other materials:
Bluetooth
Overview
For vehicles equipped with Bluetooth capability, the system can interact with
many cell phones and devices, allowing:
• Placing and receiving hands-free calls.
• Sharing of the cell phone’s address book or contact list with the vehicle. The
phone book will only display when that phon ...
Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the rear bumper
impact bar stud plate as noted from the original panel.
Note: If the location of the original plug weld holes can
not be determined, space the plug weld holes every 40 mm (1½ in).
Clean and prepare the ...
Rear Wheel Bearing and Hub Replacement (Drum Brake)
Special Tools
EN 45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and suitably support the vehicle. Refer to Lifting and
Jacking the Vehicle.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and
...
