Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Pretensioner Handling and Scrapping

Chevrolet Cruze Repair Manual / Restraints / Pretensioner Handling and Scrapping

Special Tools

For equivalent regional tools, refer to Special Tools.

Warning: When you are carrying an undeployed seat belt pretensioner:

Disregarding these precautions may result in personal injury or unnecessary SIR system repairs.

Deployment Inside Vehicle - Vehicle Scrapping Procedure
Deploy the inflator modules inside of the vehicle when destroying the vehicle or when salvaging the vehicle for parts. This includes, but is not limited to, the following situations: The vehicl ...

Scrapping Procedure
During the course of a vehicle's useful life, certain situations may arise which will necessitate the disposal of a live (undeployed) pretensioner. The following information covers the proper proce ...

Other materials:

Trademarks and License Agreements
FCC Information See “Radio Frequency Statement” in the owner manual for information regarding Part 15 of the Federal Communications Commission (FCC) rules and with Industry Canada Standards RSS-GEN/210/220/310. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been ...

Installation Procedure
Cut the rear side rail in corresponding locations to fit the remaining original panel. The sectioning joint should be trimmed to allow a gap of one-and-one-half-times the metal thickness at the sectioning joint. Create a 50 mm (2 in) backing plate from the unused portion of the serv ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to Bat ...

© 2011-2024 Copyright www.ccruze.com