Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Prevailing Torque Fasteners

Prevailing torque fasteners create a thread interface between the fastener and the fastener counterpart in order to prevent the fastener from loosening.

All Metal Prevailing Torque Fasteners

These fasteners accomplish the thread interface by a designed distortion or deformation in the fastener.

Nylon Interface Prevailing Torque Fasteners

These fasteners accomplish the thread interface by the presence of a nylon material on the fastener threads.

Adhesive Coated Fasteners

These fasteners accomplish the thread interface by the presence of a thread-locking compound on the fastener threads. Refer to the appropriate repair procedure in order to determine if the fastener may be reused and the applicable thread-locking compound to apply to the fastener.

  1. Prevailing Torque Nut, Center Lock Type
  2. Prevailing Torque Nut, Top Lock Type
  3. Prevailing Torque Nut, Nylon Patch Type
  4. Prevailing Torque Nut, Nylon Washer Insert Type
  5. Prevailing Torque Nut, Nylon Insert Type
  6. Prevailing Torque Bolt, Dry Adhesive Coating Type
  7. Prevailing Torque Bolt, Thread Profile Deformed Type
  8. Prevailing Torque Bolt, Nylon Strip Type
  9. Prevailing Torque Bolt, Out-of-Round Thread Area Type

A prevailing torque fastener may be reused ONLY if:

Metric Prevailing Torque Fastener Minimum Torque Development

English Prevailing Torque Fastener Minimum Torque Development

English Prevailing Torque Fastener Minimum Torque Development

Thread Inserts

Metric Fasteners
This vehicle provides fastener dimensions using the metric system. Most metric fasteners are approximate in diameter to equivalent English fasteners. Make replacements using fasteners of the same n ...

Thread Inserts
General Purpose Thread Repair Kits. These kits are available commercially. Repair Procedure Warning: Refer to Safety Glasses Warning in the Preface section. Note: Refer to the thread repair ...

Other materials:

Inflatable Restraint Module Handling and Scrapping
Special Tools EL-38826 SIR Deployment Harness EL-39401-B SIR Deployment Fixture For equivalent regional tools, refer to Special Tools. Live and Undeployed Inflator Module Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section. Take special care when h ...

Rear Side Door Wiring Harness Replacement
Preliminary Procedure Remove the rear side door inner panel trim. Refer to Rear Side Door Trim Replacement. Rear Side Door Wiring Harness Warning: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF befor ...

Steering Linkage Outer Tie Rod Replacement
Preliminary Procedure Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Steering Linkage Tie Rod Nut Caution: Refer to Fastener Caution in the Preface section. Tighten 35 Nm (26 lb ft) Steering Linkage Inner Tie Rod Nut Tighten 60 Nm (44 ...

2011-2022 Copyright www.ccruze.com