Chevrolet Cruze Repair Manual: Rear Side Door Outer Panel Replacement (MAG-Welding)
Special Tools
- BO-6396 Bonding Pliers
- BO-6392 Flanging Tool Kit
For equivalent regional tools, refer to Special Tools.
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed.
Installation Procedure
Apply structural adhesive on the flanges of the front side door inner
panel where the front side door outer panel bears on.
Align the front side door outer panel.
Verify the fit of the front ...
Removal Procedure
Warning: Refer to Glass and Sheet Metal Handling Warning in the
Preface section.
Disable the SIR System. Refer to SIR Disabling
and Enabling.
Disconnect the negative battery cable. Re ...
Other materials:
Roof Console Replacement
Dome Lamp Bezel
Roof Console Screw (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
2.5 N·m (22 lb in)
Roof Console Assembly
Procedure
Disconnect the electrical connectors.
When replacing the driver information display bezel, remove the dri ...
Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for
drying or for replacing the components:
For a 1-piece carpet assembly bonded to a cotton or a fiber padding,
replace the entire assembly
For a 2-piece carpet assembly with a cotton or a fiber padding, replace
...
Engine Overheating
There is an engine coolant temperature gauge on the vehicle instrument cluster
to warn of engine overheating.
If the decision is made not to lift the hood when this warning appears, get service
help right away.
If the decision is made to lift the hood, make sure the vehicle is parked on
a le ...
