Preliminary Procedure
Remove the rear side door window regulator. Refer to Rear Side Door Window Regulator Replacement.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb in)
Rear Side Door Window Regulator Handle Replacement
Procedure
Use a BO-317-B remover aid in the removal of the rear side door crank.
Special Tools
BO-317-B Remover
For equivalent regional tools, refer to Special Tools.
Front Side Door Window Outer Sealing Strip Replacement
Body Waterleak Repair
Warning: If the vehicle interior is exposed to moisture and becomes
soaked up to the level of the sensing and diagnostic module (SDM),
the SDM and SDM harness connector must be replaced. The SDM could be activated
when powered, which could cause airbag deployment
and result in personal inj ...
Installation Procedure
Cut the front compartment front rail in corresponding locations to fit
the remaining original panel. The sectioning joint should be
trimmed to allow a gap of one-and-one-half-times the metal thickness at the
sectioning joint.
Create a 50 mm (2 in) backing plate from the unused porti ...
Safety Belt Use During Pregnancy
Safety belts work for everyone, including pregnant women. Like all occupants,
they are more likely to be seriously injured if they do not wear safety belts.
A pregnant woman should wear a lap-shoulder belt, and the lap portion should
be worn as low as possible, below the rounding, throughout ...