Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Removal Procedure

Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section.

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

  1. Disable the SIR System. Refer to SIR  Disabling and Enabling.
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  3. Remove all related panels and components.
  4. Visually inspect the damage. Repair as much of the damage as possible.
  5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.

  1. Locate and mark all the necessary factory welds of the front wheelhouse panel rear reinforcement.
  2. Drill all factory welds. Note the number and location of welds for installation of the service assembly.

  1. Remove the front wheelhouse panel rear reinforcement.
Front Wheelhouse Panel Rear Reinforcement Replacement (MAG-Welding)
Note: According to different corrosion warranties, only the regional mandatory joining methods are allowed. ...

Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the front wheelhouse panel rear reinforcement as noted from the original panel. Drill 8 mm (5/16 in) for plug welding whe ...

Other materials:

Hood Primary and Secondary Latch Replacement
Preliminary Procedure Remove the front bumper fascia. Refer to Front  Bumper Fascia Replacement. Remove the radiator grille support reinforcement. Refer to Radiator Grille Reinforcement Support Replacement. Hood Primary and Secondary Latch Retainer Bolt (Qty: 2) Caution: ...

Prevailing Torque Fasteners
Prevailing torque fasteners create a thread interface between the fastener and the fastener counterpart in order to prevent the fastener from loosening. All Metal Prevailing Torque Fasteners These fasteners accomplish the thread interface by a designed distortion or deformation in the fastene ...

Rear Seat Back Cushion Cover and Pad Replacement - Left Side
Preliminary Procedure Remove rear seat - left side. Refer to Rear Seat Replacement Rear Seat Back Cushion Cover Procedure Remove the staples  from the seat back cover. Remove seat back cushion cover from Velcro. Rear Seat Back Cushion Pad Rear Seat Back Cushion Cover and Pad Re ...

© 2011-2024 Copyright www.ccruze.com