Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: StabiliTrak® System

The vehicle has a vehicle stability enhancement system called StabiliTrak. It is an advanced computer controlled system that assists with directional control of the vehicle in difficult driving conditions.

StabiliTrak activates when the computer senses a difference between the intended path, and the direction the vehicle is actually traveling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help steer the vehicle in the intended direction.

StabiliTrak is on automatically whenever the vehicle is started. To assist with directional control of the vehicle, the system should always be left on.

TCS/StabiliTrak Light

TCS/StabiliTrak Light

When the stability control system activates, This also occurs when traction control is activated. flashes on in the instrument cluster. This also occurs when traction control is activated.

A noise may be heard or vibration may be felt in the brake pedal. This is normal. Continue to steer the vehicle in the intended direction.

If there is a problem detected with StabiliTrak, SERVICE STABILITRAK is displayed on the Driver Information Center (DIC). When this message is displayed and/or is safe to drive but the system is not operational. comes on and stays on, the vehicle is safe to drive but the system is not operational.

Driving should be adjusted accordingly.

If the system: comes on and stays on, reset the system:
1. Stop the vehicle.

2. Turn the engine off and wait 15 seconds.

3. Start the engine.

If a speed above 20 km/h (13 mph), see your dealer for service. still comes on and stays on at a speed above 20 km/h (13 mph), see your dealer for service.

TCS/StabiliTrak Button

TCS/StabiliTrak Button

is on the console.

StabiliTrak Off Light

StabiliTrak Off Light

TCS Off Light

TCS Off Light

StabiliTrak can be turned off if needed by pressing and holding and until come on in the instrument cluster. and When StabiliTrak is turned off, the system will not assist with directional control come on in the instrument cluster. When StabiliTrak is turned off, the system will not assist with directional control of the vehicle or limit wheel spin. Driving should be adjusted accordingly.

Press and release the system back on. again to turn the system back on.

If cruise control is being used when StabiliTrak activates, cruise control will automatically disengage. Press the cruise control button to reengage when road conditions allow.

Traction Control System (TCS)
The vehicle has a Traction Control System (TCS) that limits wheel spin. On a front-wheel-drive vehicle, the system operates if it senses that one or both of the front wheels are spinning or beginni ...

Cruise Control
For vehicles with cruise control, the vehicle can maintain a speed of about 40 km/h (25 mph) or more without keeping your foot on the accelerator. Cruise control does not work at speeds below 40 k ...

Other materials:

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Collision Sectioning Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR   ...

Connections
OnStar Hands-Free Calling allows calls to be made and received from the vehicle. The vehicle can also be controlled from a cell phone through the OnStar RemoteLink mobile app. For coverage maps, see www.onstar.com (U.S.), www.onstar.ca (Canada). Hands-Free Calling 1. Press . System responds: ...

Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning in the Preface section. Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section. Disable the SIR System. Refer to SIR  Disabling and Enabling. Disconnect the negative battery cable. Refer to Bat ...

© 2011-2024 Copyright www.ccruze.com