Chevrolet Cruze Repair Manual: Stabilizer Shaft Link Replacement
Preliminary Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
Stabilizer Shaft Link Nut (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Procedure
Discard the old stabilizer shaft link nut and use NEW ONLY.
Tighten 65 N·m (48 lb ft)
Stabilizer Shaft Link
Stabilizer Shaft Replacement
Special Tools
CH 904 Underframe
CH 49289 Centering Adapter
EN 45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Turn the front whee ...
Stabilizer Shaft Insulator Replacement
Special Tools
CH 904 Underframe
EN 45059 Torque Angle Sensor Kit
CH 49289 Centering Adapter
For equivalent regional tools, refer to Special Tools. ...
Other materials:
USB
Playing from a USB
A USB mass storage or Certified Windows Vista®/Media Transfer Protocol (MTP)
device can be connected to the USB port.
The USB port is in the center console.
The USB icon displays when the USB device is connected.
USB Media Formats
The USB port will support the following med ...
Traction Off Light
This light comes on briefly while starting the engine. If it does not, have the
vehicle serviced by your dealer. If the system is working normally, the indicator
light then turns off.
The traction off light comes on when the Traction Control System (TCS) has been
turned off by pressing and ...
Dual Stage Inflator Modules
Dual stage inflator modules contain a housing, inflatable air bag, two
initiating devices, canister of gas generating material and, in some
cases, stored compressed gas. The two initiators are part of the frontal
deployment loop. The function of the frontal deployment loops are
to supply curre ...
