Chevrolet Cruze manuals

Chevrolet Cruze Owners Manual: Tires

Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.

WARNING

• Poorly maintained and improperly used tires are dangerous.

• Overloading the tires can cause overheating as a result of too much flexing.

There could be a blowout and a serious crash.

• Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury.

Check all tires frequently to maintain the recommended pressure.

Tire pressure should be checked when the tires are cold.

• Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact— such as when hitting a pothole. Keep tires at the recommended pressure.

• Worn or old tires can cause a crash. If the tread is badly worn, replace them.

• Replace any tires that have been damaged by impacts with potholes, curbs, etc.

• Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires.

• Do not spin the tires in excess of 56 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc. Excessive spinning may cause the tires to explode.

Wheels and Tires
...

All-Season Tires
This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces and weather conditions. Original equipment tires designed to GM' ...

Other materials:

Strut Assembly Replacement
Special Tools CH 49375 Wrench For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Separate the brake hose ...

Installation Procedure
Align the rocker inner panel. Clean and prepare the attaching surfaces for spot welding. Apply structural adhesive to all attaching surfaces. Position the rocker  inner panel on the vehicle. Verify the fit of the quarter outer panel Clamp the rocker inner panel into posi ...

Floor Carpet Drying
If the carpet or the pad or insulator is wet, use the following criteria for drying or for replacing the components: For a 1-piece carpet assembly bonded to a cotton or a fiber padding, replace the entire assembly For a 2-piece carpet assembly with a cotton or a fiber padding, replace ...

© 2011-2024 Copyright www.ccruze.com