Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Tires and Wheels

Specifications

Aluminum Wheel Porosity Repair

Rear Suspension Description and Operation
This vehicle has a semi-independent twist-beam rear suspension system consisting of the following components: An axle with integral trailing arms AV shaped twisting cross beam Two coil sprin ...

Aluminum Wheel Porosity Repair
Remove the tire and wheel. Refer to Tire and Wheel Removal   and Installation. Inflate the tire to the manufactures specified pressure as stated on the tire. Submerge the tire/w ...

Other materials:

Battery Negative Cable Disconnection and Reconnection
Removal Procedure Turn on the radio and record all of the customer radio station presets. Ensure that all lamps and accessories are turned off. Turn the ignition OFF and remove the ignition key. Warning: Refer to Battery Disconnect Warning in the Preface section. Loosen the negati ...

Tire Pressure
Tires need the correct amount of air pressure to operate effectively. Notice: Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can result in: • Tire overloading and overheating which could lead to a blowout. • Premature or irregula ...

Rear Compartment Lid Emblem/Nameplate Replacement (CDX)
Rear Compartment Lid Emblem Assembly Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface section. Procedure The part and surface should be 21°C (70°F) prior to installation. The vehicle should remain 21°C (70°F) for one hour after assembly to allow adhesive to deve ...

© 2011-2024 Copyright www.ccruze.com