Specifications
Door Lock/Indicator Schematics
Door Control Module Schematics
Release Systems Schematics
Fuel Tank Filler Door Lock Actuator Replacement
Preliminary Procedure
Remove the fuel tank filler housing. Refer to Fuel Tank Filler Pipe Housing Replacement.
Front Side Door Lock Cylinder Replacement
Procedure
Use a plastic flat-bladed tool to remove.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb in)
Procedure
Tip
Pull the front side door outside handle to unlock the door lock cylinder.
Front Side Door Outside Handle Replacement
Procedure
Use a plastic flat-bladed tool to remove.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb in)
Procedure
Pull the outside handle rearward to release it from the inside handle housing.
Procedure
Inspect the lock, lock cylinder and handle adjustments. Refer to Front Side Door Outside Handle Rod Adjustment.
Rear Side Door Outside Handle Replacement
Procedure
Use a plastic flat-bladed tool to remove.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb in)
Procedure
Pull the outside handle rearward to release it from the handle housing.
Procedure
Inspect the lock and handle adjustments. Refer to Rear Side Door Outside Handle Rod Adjustment.
Rear Side Door Outside Handle Housing Replacement
Preliminary Procedure
Caution: Refer to Fastener Caution in the Preface section.
Tighten 2.5 N·m (22 lb in)
Procedure
Rear Compartment Lid Latch Replacement
Preliminary Procedure
Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
Caution: Refer to Fastener Caution in the Preface section.
Tighten 9 N·m (80 lb ft)
Front Side Door Lock Replacement
Preliminary Procedure
Front Side Door Lock Screw (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 10 N·m (89 lb in)
Front Side Door Lock Assembly
Procedure
Rear Door Lock Replacement
Rear Side Door Lock Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 10 N·m (89 lb in)
Rear Side Door Lock Assembly
Procedure
Front Side Door Outside Handle Housing Replacement
Preliminary Procedure
Front Side Door Handle Housing Bolt
Caution: Refer to Fastener Caution in the Preface section.
Tighten 2.5 N·m (22 lb in)
Front Door Outside Handle Housing
Procedure
Front Side Door Locking Rod Replacement
Preliminary Procedure
Front Side Door Lock Rod
Procedure
Inspect the lock, lock cylinder and handle adjustments. Refer to Front Side Door Outside Handle Rod Adjustment.
Front Side Door Locking Rod Clip
Front Side Door Outside Handle Rod Adjustment
Preliminary Procedure
Remove the water deflector. Refer to Front Side Door Water Deflector Replacement.
Outside Door Handle Rod Clip
Procedure
Use a flat-head tool to open the clip from the threaded rod connecting the lock to the outside handle.
Outside Door Handle Rod
Procedure
Rear Side Door Locking Rod Replacement
Preliminary Procedure
Rear Side Door Lock Rod
Procedure
Inspect the lock, lock cylinder and handle adjustments. Refer to Rear Side Door Outside Handle Rod Adjustment
Rear Side Door Locking Rod Clip
Paint Gauges
Paint thickness gauge. measure the total thickness of the vehicle finish. It
is important to accurately measure the thickness of the finish on
each vehicle as the thickness of the finish will vary on each vehicle. Use a
paint gauge before the sanding process in order to accurately
measure how ...
Installation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the rear inner
wheelhouse as noted from the original panel.
Note: If the location of the original plug weld holes can not be
determined, space the plug weld holes every 40 mm (1½ in).
Clean and prepare the attaching & ...
Tire Rotation
Tires should be rotated every 12 000 km (7,500 mi).
Tires are rotated to achieve a uniform wear for all tires. The first rotation
is the most important.
Anytime unusual wear is noticed, rotate the tires as soon as possible, check
for proper tire inflation pressure, and check for damaged tires ...