Chevrolet Cruze Owners Manual: Vehicle Data Recording and Privacy

Chevrolet Cruze Owners Manual / Customer Information / Vehicle Data Recording and Privacy

The vehicle has a number of computers that record information about the vehicle’s performance and how it is driven. For example, the vehicle uses computer modules to monitor and control engine and transmission performance, to monitor the conditions for airbag deployment and deploy them in a crash, and, if equipped, to provide antilock braking to help the driver control the vehicle. These modules may store data to help the dealer technician service the vehicle.

Some modules may also store data about how the vehicle is operated, such as rate of fuel consumption or average speed. These modules may retain personal preferences, such as radio presets, seat positions, and temperature settings.

Reporting Safety Defects to General Motors

In addition to notifying NHTSA (or Transport Canada) in a situation like this, notify General Motors. Call 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center ...

Event Data Recorders

This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road ...

Other materials:

Tire Sealant and Compressor Kit
WARNING Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has ...

License Plate Lamp
To replace the license plate lamp bulb: 1. Remove the two screws from the license plate lamp assembly. 2. Turn and pull the license plate lamp assembly down. 3. Turn the bulb socket counterclockwise and pull straight out of the lamp assembly. 4. Remove the bulb by pulling it straight out of ...

Relieving Fuel Pressure Warning
Warning: Remove the fuel tank cap and relieve the fuel system pressure before servicing the fuel system in order to reduce the risk of personal injury. After you relieve the fuel system pressure, a small amount of fuel may be released when servicing the fuel lines, the fuel injection pump, or ...