Chevrolet Cruze manuals

Chevrolet Cruze Repair Manual: Windshield Washer Nozzle Hose Replacement

Chevrolet Cruze Repair Manual / Body systems / Wipers and Washers / Windshield Washer Nozzle Hose Replacement

Preliminary Procedure

Preliminary Procedure

  1. Remove the hood insulator. Refer to   Hood Insulator Replacement.
  2. Place a clean container under the front driver side near where the windshield washer nozzle and windshield washer pump hose will be disconnected.
  3. Recover all lost windshield washer solvent.
  1. Windshield Washer Nozzle Hose

Tip

Disconnect the washer hose from both hood mounted washer nozzles.

  1. Windshield Washer Hose Retainer to Hood Hinge
  2. Windshield Washer Nozzle Hose Integral Connector

Tip

Disconnect the hoses in order to remove the windshield washer nozzle hose.

  1. Windshield Washer Pump Hose

Windshield Washer Nozzle Replacement

Preliminary Procedure

Preliminary Procedure

  1. Disconnect the washer  hose from the washer nozzles.
  2. Remove the hood insulator. Refer to Hood Insulator Replacement

Windshield Washer Nozzle Assembly

Tip

Pinch the washer nozzle from the bottom side in order to release the nozzle and push the nozzle outboard from the hood to remove.

Windshield Washer Solvent Container Filler Tube Replacement

Windshield Washer Solvent Container Filler Tube Assembly

Windshield Washer Solvent Container Filler Tube Assembly

Procedure

  1. Pull the upper tube assembly from the lower washer container and inspect the grommet (1), replace if damaged.

    Refer to Windshield Washer Solvent Container Grommet Replacement.

  2. Insert the tube rib flush to the top seal at the lower container.

Windshield Washer Solvent Container Grommet Replacement

Preliminary Procedure

Preliminary Procedure

Remove the windshield washer solvent container filler tube assembly. Refer to Windshield Washer Solvent Container Filler Tube Replacement

  1. Windshield Washer Solvent Container Grommet
Wipers and Washers
Specifications Wiper/Washer Schematics Windshield Wiper and Washer Switch Replacement Preliminary Procedure Remove the steering column trim covers. Refer to Steering Column Low ...

Windshield Washer Pump Replacement
Removal Procedure Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement. Disconnect the washer pump electrical connector (1). Disconnect the washer pump hose (2 ...

Other materials:

StabiliTrak® OFF Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the TCS is off, the system does not assist i ...

SIR Inflator Module Handling and Storage Warning
Warning: When carrying an undeployed inflator module: Do not carry the inflator module by the wires or connector. Make sure the air bag opening points away from you. When storing an undeployed inflator module: Make sure the air bag opening points away from the surface on which the in ...

All-Season Tires
This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces and weather conditions. Original equipment tires designed to GM's specific tire performance criteria have a TPC specification code molded onto the sidewall. Origi ...

© 2011-2024 Copyright www.ccruze.com