
The dome lamp controls are in the headliner.
(Dome Lamp Override):
Press to turn the lamps off, even when a door is open.
(Door)
: Press to turn the lamps on automatically when a door is opened.
(On):
Press to turn on the dome lamps.
Courtesy Lamps
Reading LampsInstallation Procedure
Drill 8 mm (5/16 in) for plug welding along the edges of the rear bumper
impact bar stud plate as noted from the original panel.
Note: If the location of the original plug weld holes can
not be determined, space the plug weld holes every 40 mm (1½ in).
Clean and prepare the ...
Floor Air Outlet Replacement
Removal Procedure
Remove the instrument panel assembly. Refer to Instrument Panel
Assembly Replacement.
Remove the instrument panel wiring harness (2) from the instrument panel
tie bar (1).
Disconnect the electrical connectors.
Remove the instrument panel tie bar ...
Installation Procedure
Clean and prepare the attaching surfaces for welding.
Apply structural adhesive to the attaching flanges.
Position the body side outer lower panel on the vehicle
Verify the fit of the body side outer lower panel.
Clamp the body side outer lower panel into position.
Spot ...