Chevrolet Cruze Owners Manual: Vehicle Messages

Chevrolet Cruze Owners Manual / Instruments and Controls / Vehicle Messages

Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other.

The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.

The following are some of the vehicle messages that may be displayed depending on your vehicle content.

Information Displays

Driver Information Center (DIC) The DIC displays information about your vehicle. It also displays warning messages if a system problem is detected. DIC Operation and Displays The DIC has differen ...

Battery Voltage and Charging Messages

BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the v ...

Other materials:

When Should an Airbag Inflate?
This vehicle has advanced technology frontal airbags. Frontal airbags are designed to inflate in moderate to severe frontal or near frontal crashes to help reduce the potential for severe injuries, mainly to the driver's or front outboard passenger's head and chest. However, they are ...

Windshield Garnish Molding Replacement
Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling. Windshield Garnish Molding Assembly Procedure Loosen tether clip and steel clips. Disconnect electrical connector. The tether clip at the upper portion of the garnish molding MUST be repla ...

Installation Procedure
Position the lower control arm (1) in the cradle. Install and hand tighten the NEW rear lower control arm bushing nuts and bolts (1). Install and hand tighten the NEW front lower control arm nut and bolt (1). Caution: Refer to Fastener Caution in the Preface secti ...